3
1
1
Introduction Fuel requirements
Petrol containing alcohol and
methanol
Gasohol, a mixture of petrol and
ethanol (also known as grain alco
-
hol), and petrol or gasohol contain
-
ing methanol (also known as wood
alcohol) are being marketed along
with or instead of leaded or
unleaded petrol.
Do not use gasohol containing more
than 10% ethanol, and do not use
petrol or gasohol containing any
methanol. Either of these fuels may
cause drivability problems and dam
-
age to the fuel system, engine con
-
trol system and emission control
system.
Discontinue using gasohol of any
kind if driveability problems occur.
Vehicle damage or driveability prob
-
lems may not be covered by the
manufacturer's warranty if they
result from the use of:
1. Gasohol containing more than
10% ethanol.
2. Petrol or gasohol containing
methanol.
3. Leaded fuel or leaded gasohol.
Never use gasohol which contains
methanol. Discontinue use of any
gasohol product which impairs driv
-
ability.
Other fuels
Using fuels such as
䳜 Silicone (Si) contained fuel,
䳜 MMT (Methylcyclopentadienyl
Manganese Tricarbonyl), Manga
-
nese (Mn) contained fuel,
䳜 Ferrocene (Fe) contained fuel, and
䳜 Other metallic additives con
-
tained fuels,
may cause vehicle and engine dam
-
age or cause plugging, misfiring,
poor acceleration, engine stalling,
catalyst melting, abnormal corro
-
sion, life cycle reduction, etc.
Also, the Malfunction Indicator Lamp
(MIL) may illuminate.
Damage to the fuel system or per
-
formance problem caused by the
use of these fuels may not be cov
-
ered by your New Vehicle Limited
Warranty.
Use of MTBE
Kia recommends avoiding fuels con
-
taining MTBE (Methyl Tertiary Butyl
Ether) over 15.0% vol. (Oxygen Con
-
tent 2.7% weight) in your vehicle.
Fuel containing MTBE over 15.0%
vol. (Oxygen Content 2.7% weight)
may reduce vehicle performance
and produce vapour lock or hard
starting.
To Next Page
Loading...
Need help?
General
