Driving your vehicle
1405
Blind-Spot Collision-Avoidance Assist (BCA)
When the engine is restarted with
the function off, the 'Blind-Spot
Safety System is Off' message will
appear on the cluster.
If you change the setting from 'Off'
to 'Active Assist' or 'Warning Only',
the warning light on the side view
mirror will blink for approximately 3
seconds.
In addition, if the engine is turned
on, when the function is set to
'Active Assist' or 'Warning Only', the
warning light on the side view mir
-
ror will blink for approximately 3
seconds.
䳜 'If 'Warning Only' is selected,
braking is not assisted.
䳜 If 'Off' is selected, the driver
should always be aware of the
surroundings and drive safely.
If the engine is restarted, Blind-Spot
Safety system will maintain the last
setting.
Warning timing
With the ENGINE START/STOP but
-
ton in the ON position, select 'Driver
Assistance → Warning Timing' from
the Settings menu to change the
initial warning activation time for
Blind-Spot Safety system.
When the vehicle is first delivered,
Warning Timing is set to 'Normal. If
you change the Warning Timing, the
warning time of other Driver Assis
-
tance systems may change.
To Next Page
Loading...
Need help?
General
