Maintenance
867
Light bulbs
If you don't have necessary tools,
the correct bulbs and the expertise,
consult a professional workshop. Kia
recommends to consult an
authorised Kia dealer/service part
-
ner.
In many cases, it is difficult to
replace vehicle light bulbs because
other parts of the vehicle must be
removed before you can get to the
bulb. This is especially true if you
have to remove the headlight
assembly to get to the bulb(s).
Removing/installing the headlight
assembly can result in damage to
the vehicle.
䳜 If unauthentic parts or substan
-
dard lights are used when chang
-
ing lights, it may lead to fuse
disconnection and malfunction,
and other wiring damages.
䳜 Do not install extra lamps or LED
to the vehicle. If supplementary
lights are installed, it may lead to
lamp malfunction and flickering of
the lights. In addition, the fuse
box and other writing may be
damaged.
Lamp part malfunction due to net-
work failure
The headlamp, taillight, and fog light
may lit up when the head lamp
switch is turned ON, and not light up
when the taillight or for light switch
is turned ON. This may be cause by
network failure or vehicle electrical
control system malfunction. If there
is a problem, have the system ser
-
viced by a professional workshop.
Kia recommends to visit an
authorised Kia dealer/service part
-
ner.
Lamp part malfunction due to elec
-
trical control system stabilization
A normally functioning lamp may
flicker momentarily. This momen
-
tary occurrence is due to stabiliza
-
tion unction of the vehicle's
electrical on control system. If the
lamp soon returns to normal, the
vehicle does not require service.
However, if the lamp goes out after
the momentary flickering, or the
flickering continues, have the sys
-
tem serviced by a professional
workshop. Kia recommends to visit
an authorised Kia dealer/service
partner.
To Next Page
Loading...
Need help?
General
