6. Improper use of the draw-bar, even
if correctly positioned, can cause a
rear overturn.
7. Do not overload an attachment
or towed equipment. Use proper
counterweights to maintain tractor
stability. Hitch heavy loads to the
draw-bar only.
M55O117a
8. Check for correct coupling be-
tween tow hook and trailer. See
the Towing Attachments chapter.
9. Use ballast weight as recom-
mended. Never add more ballast
to compensate a higher load than
allowed. Reduce load for safety.
10. A safety chain will help control
drawn equipment should it be
accidentally separated from the
draw-bar while transporting.
H11O682a
4. Make sure that all pressure lines
are tight before starting the tractor.
5. The front hitch receiver can be
installed on front axle frame. Pull
only from the draw-bar and front
hitch receiver. NEVER HITCH
ANYTHING TO THE AXLE HOUS-
ING OR ANY OTHER POINT EX-
CEPT INDICATED POINTS. Pull-
ing from any other location only in-
crease the risk of serious personal
injury or death.
(1) Draw-bar (2) Towing Hook
M46O107a
To Next Page
Loading...
Need help?
General
