RAISING THE ROPS TO UPRIGHT POSITION
1. Pull the set pin forward.
2. Raise ROPS to the upright posi-
tion.
3. Align it to the groove and pull the
set pin to release it.
(1) Grip Bolt (2) Set Pin
To avoid accidents:
Make sure the pins are prop-
erly installed and secured.
CAUTION
To avoid accidents:
Make sure to set the ROPS up-
right and fasten the seat belt
during work.
If it is necessary to work with
it folded, do not fasten the
seat belt.
It can be dangerous in case of
tractor rollover.
CAUTION
M46O509A M46O510A
To Next Page
Need help?
General
