This switch can be used to warn
other vehicles when malfunction oc-
curs in the tractor while driving on
a public road. Pressing this switch
blinks the hazard lamp and returning
it turns off the lamp. The turn signal
lights cannot be operated while this
switch is pressed to operate the haz-
ard lamps.
HAZARD LAMP SWITCH
(1) Hazard Lamp Switch
(A) ON (B) OFF
M46O408A
If the hazard lamps are turned
on fo r an extended pe riod
of time while the engine is
stopped, the battery can be
discharged. Therefore, use
them only in emergency.
The hazard lamp can be oper-
ated without the key inserted.
CAUTION
To activate the cruise control func-
tion, set the desired speed and press
the switch to the “ON” position.
Depress the HST pedal to increase
the driving speed in order to acceler-
ate at a constant speed. To deacti-
vate the cruise function, depress the
brake pedal or press the switch to
the “OFF” position.
The cruise function is not activated
during reverse.
(1) Cruise Operation Switch
(A) ON (B) OFF
CRUISE OPERATION SWITCH
(OPTIONAL)
M46O409A
To Next Page
Need help?
General
