4. Observe all local trafc and safe-
ty regulations.
5. Turn the headlights "ON". Dim
them when meeting another ve-
hicle.
6. Drive at speeds that allow you to
maintain control at all times.
7. Do not apply the differential lock
while traveling at road speeds
the tractor may run out of control.
8. Avoid sudden movements of the
steering wheel as this can cause
a loss of control of the tractor.
This risk is especially great when
traveling at road speeds.
9. Do not operate an implement
while the tractor is on the road.
Lock the three point hitch in the
raised position.
10. When towing other equipment,
use a safety chain and place an
SMV emblem on it as well.
1. Disengage the P.T.O, lower all
implements, place all control le-
vers in the neutral position, set
the parking brake, stop the engine
and remove the key.
WHEN PARKING THE TRACTOR
T66O120a
(1) P.T.O Shaft Cover (2) P.T.O Shaft Cap
WHEN OPERATING THE P.T.O
1. Make sure the tractor is completely
stopped, gears are in neutral and
all moving components have com-
pletely stopped before connecting,
disconnecting, adjusting, clean-
ing or servicing any P.T.O driven
equipment.
2. Keep the P.T.O shaft cover in place
at all times. Replace the P.T.O shaft
cap when the shaft is not in use.
3. Before installing or using P.T.O
M46O103a
To Next Page
Loading...
Need help?
General
