Kipor KP310V1.0 User Manual

KP310V1.0 Controller Operation Manual
- 3 -
5. Operation
5.1 Function of keys
Stop／Reset
Genset is running, press
to stop genset, when genset is in
alarming status, press
to reset.
In “System Set” mode, press
to return to the previous
sub-menu.
Manu／ATS
Press
to set genset in “Manual” Mode.
In “System Set” mode, press
to decrease the data value, equal
to “-”.
Remote
Control
Press
to set genset in remote control mode.
In “System Set” mode, press
to increase the data value,
equal to “+”.
Start
In ““Manual” Mode, press
can start genset.
Parameters Set
Press to enter “Parameters Set” selection menu.
Note：
1 when the generator is stopped and in “Manual” Mode, press
and for 5 seconds at
the same time, it displays password “Test” mode . If user doesn’t input the right
password in 60 seconds, the system will automatically exit password menu and enters System
Operation menu.
2 In “Parameters Set” menu, press , and for 5 seconds in the same time to
backup current system set, and the digital tube displays “Backup” for 2 seconds.
3 When genset is stopped, and in “Manual” Mode, press
, and for 5secs to
restore system set, and the digital tube displays “Reset” for 2 seconds.
4 In the “Oil Filter Running Time” mode, press
for 5 seconds, it will clear alarm of oil filter

Kipor KP310V1.0 Specifications

General

Brand	Kipor
Model	KP310V1.0
Category	Controller
Language	English