36
Bevel/Miter Settings
NOTE: The chart below references a compound cut for crown moulding ONLY WHEN THE
ANGLE BETWEEN THE WALLS EQUALS EXACTLY 90°.
KEY
BEVEL ANGLE
SETTING
MITER ANGLE
SETTING
TYPE OF CUT
Inside Corner - Left Side
IL 33.9° 31.6° Right
1. Position top of moulding against fence.
2. LEFT side is nished piece.
Inside Corner - Right Side
IR 33.9° 31.6° Left
1. Position bottom of moulding against fence.
2. LEFT side is nished piece.
Outside Corner-Left Side
OL 33.9° 31.6° Left
1. Position bottom of moulding against fence.
2. RIGHT side is nished piece.
Outside Corner - Right Side
OR 33.9° 31.6° Right
1. Position top of moulding against fence.
2. RIGHT side is nished piece.
To Next Page
Loading...
Need help?
General