Kodak EasyShare Printer Dock Plus Series 3 User Manual

www.kodak.com/go/support 8
2 Setting up your digital camera
Docking and charging your digital camera
Docking your digital camera lets you make prints directly from the camera and transfer
pictures from the camera to the computer. Docking your camera also charges an
installed Kodak Ni-MH rechargeable digital camera battery or Kodak Li-Ion
rechargeable digital camera battery. See your camera user’s guide for details.
Plus, the Kodak EasyShare printer dock plus series 3 is ImageLink print system
compatible. This allows you to dock not only Kodak EasyShare digital cameras, but
other brands of ImageLink system compatible digital cameras as well.
1 Make sure a custom camera insert is installed on the printer dock (see page 2). If
your camera uses a Kodak Ni-MH rechargeable digital camera battery or Kodak
Li-Ion rechargeable digital camera battery, insert in your camera for charging.
2 Place the camera on the printer dock. Push down to
seat the connector.
IMPORTANT:
Keep the camera wrist or neck strap clear
of the paper path to the front and rear of
the printer dock.
■ The Kodak Ni-MH rechargeable digital camera
battery and the Kodak Li-Ion rechargeable digital
camera battery charge up to 3 hours.

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office