Kodak EasyShare Printer Dock Plus Series 3 User Manual

Using your printer dock with a computer
www.kodak.com/go/support
28
Transferring pictures from the internal card reader
1 Make sure Kodak EasyShare software is installed (see page 22) and the printer
dock is connected to your computer (see page 24).
2 Open the accessory door on the printer dock.
3 If a digital camera is docked, remove it.
IMPORTANT:
Insert the card only as shown. Do not force the card into the card slot.
4 Orient the SD/MMC card as shown, then push the
card into the card slot to seat the connector.
5 Press the Transfer button, , on the printer dock.
Kodak EasyShare software opens on your computer (if
it is installed).
The printer dock Transfer light blinks while the pictures
are being transferred. The Transfer light continues to
blink until the Transfer or Print button is pressed, or
until the connection is no longer available.
IMPORTANT: Do not insert or remove a card when the
printer dock is transferring pictures or if the
card slot light is blinking.
■ To stop transfer, or to return the printer dock to
ready status after transferring pictures, press
the Cancel button, .
■ To remove the card, push it in, then release it. When the card is partially ejected,
pull it out.
Notched corner

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office