Kodak EasyShare Printer Dock Plus Series 3 User Manual

Printing without a computer
www.kodak.com/go/support
20
Reducing red eye in your prints
The Kodak EasyShare printer dock plus series 3 incorporates technology that
automatically detects red eye in your subjects, and lets you correct your prints with
push of a button.
To reduce red eye in your printed pictures:
■ When setting up a print job, press the Red Eye Reduction button, , before
pressing the Print button.
Red eye reduction is applied to any images that were captured using the flash on your
digital camera.
To turn red eye reduction default to always on:
■ Press and hold the Red Eye Reduction button for 5 seconds.
The Red Eye Reduction light blinks, then glows steady.
Repeat to turn the default to always off.
NOTE: The Red Eye Reduction button is disabled when printing from a computer. If printing from a
computer (see page 30), use the Kodak EasyShare software on your computer.
Printing time may slightly increase when using red eye reduction.
Canceling printing
■ Press the Cancel button, .
The print job is canceled and ejected from the printer dock. If you cancel printing during
the fourth pass (clear coat), the paper is ejected upon completion.

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office