Kodak EasyShare Printer Dock Plus Series 3 User Manual

Setting up your digital camera
www.kodak.com/go/support
10
3 Press and hold the Battery charging lights/Refresh
button,
, until the Battery charging
lights begin flashing green (approximately 5
seconds).
The charging lights monitor the refresh status:
To purchase a Kodak Ni-MH rechargeable digital camera battery for your digital
camera visit www.kodak.com/go/accessories. See your camera user’s guide for battery
compatibility.
Setting the picture quality
Before taking pictures, change the picture quality
setting (or resolution) on your digital camera to
3:2 . This ensures that the pictures you
take are proportional to the printer dock paper,
preventing unwanted cropping of your pictures.
See your camera user’s guide for more information.
Descending
blinking
green lights
Discharging battery (lights
turn off as discharging
progresses).
Ascending
steady
green lights
Charging battery (lights
turn on as charging
progresses).
Charging is complete when
all three lights are lit.

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office