Kodak EasyShare Printer Dock Plus Series 3 User Manual

Using the wireless features of your printer dock
www.kodak.com/go/support
38
Example of an Ad-Hoc network:
Adding your printer dock to a Wi-Fi wireless network
1 Open the accessory door on the printer dock.
IMPORTANT:
Insert card only as shown. Do not force the card into the card slot.
2 Orient the Kodak Wi-Fi
®
card as shown, then push
the card into the card slot to seat the connector.
The card slot light blinks as the printer dock scans for
available networks. Once connected, the card slot light
glows steady.
NOTE: When properly inserted, the card sticks out slightly, serving as
an antenna for receiving Wi-Fi signals.
■ To remove the card, push it in, then release it.
When the card is partially ejected, pull it out.
3 Make sure the printer driver from the included Kodak EasyShare software CD is
installed on your computer (see page 22), then connect the printer dock to your
computer with the USB cable (see page 24).
Notched corner

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office