Kodak EasyShare Printer Dock Plus Series 3 User Manual

49 www.kodak.com/go/support
Troubleshooting
Printer is jammed
(Paper and/or
cartridge lights may
blink quickly)
IMPORTANT: Use only Kodak color cartridge & paper kits for your printer
dock. Do not use inkjet paper.
■ If the Paper light is blinking quickly:
1 Remove the paper tray (page 7).
2 Disconnect the power from the printer dock for 5 seconds, then
reconnect the power.
Carefully remove the paper if it does not automatically eject.
IMPORTANT: Check the paper slot on the back of the printer dock for
jammed paper:
3 Remove the paper supply from the paper tray. Carefully "fan" the
paper to keep the sheets from sticking together.
4 Reload the paper tray. Do not exceed the fill line.
5 Re-install the paper tray, then press to resume printing.
■ If the Color Cartridge light is blinking quickly, check the color
cartridge:
IMPORTANT: The color cartridge may lock in place if there is a paper
error. Do not attempt to remove the cartridge without first
clearing the paper error. Make sure the Paper light is off
before attempting to remove the cartridge (see Paper light
under Status lights, page 58).
Remove the color cartridge, remove any slack from the ribbon, then
re-install the cartridge (page 4). Press to resume printing.
Problem Cause and/or solution

Kodak EasyShare Printer Dock Plus Series 3 Specifications

General

Print technology	Dye-sublimation
Maximum resolution	300 x 300 DPI
Time to first page (color, normal)	60 s
File type	JPEG/EXIF v2.2
Mac compatibility	Yes
Dimensions (WxDxH)	334 x 83 x 188 mm
Connectivity technology	Wireless
Compatible operating systems	Windows 98, 98SE, ME, 2000 SP1, XP, Mac OS X 10.2.8, 10.3.
Standard media sizes	1 x (100 x 150) mm, 2 x (75 × 100) mm, 3 x (50 × 75) mm, 4 x (33 × 500 mm.
Minimum RAM	128 MB
Minimum processor	233 MHz
Minimum storage drive space	200 MB
Minimum system requirements	SVGA (800 x 600), CD-ROM, USB.
USB 2.0 ports quantity	1
Market positioning	Home & office