Confirm that the battery has been correctly installed in the
"remote controller".
Confirm that there is no obstacle in front of the product.
Wait for the host to finish the self-checking. During that time,
it is normal to hear rotating sound of the motor and bicker.
Self-checking completed when the light light flashes.
Press the power key on the auxiliary pand at the side of the
seat; confirm that the seat is in the state of power on.(When
pressing the key, the long sound stands for power off while
the short one for power on.)
When it is used for the first time, it is in the state of default
value:
()
4
4
6H
Front Wash:
Water Temperature: mid
Pressure: mid
Position: Level 4
Rear Wash:
Water Temperature: mid
Pressure: mid
Position: Level 4
Seat Temperature: mid
Wind Temperature: mid
Energy Saving Mode: 6H
Presetting: Empty
Function of Auto Lid-Turning: On
Function of Auto Flushing: On
Night Light: On
-14-
PREPARATIONS BEFORE THE FIRST USEPREPARATIONS BEFORE THE FIRST USE
Open the
shutoff valve
Fig.#24
24
1144585-T01-A
To Next Page
Loading...
Need help?
General
