7. PRECAUTIONS FOR OPERATION SAFETY
2-12
7. PRECAUTIONS FOR OPERATION
BEFORE STARTING ENGINE
If there is a warning tag hanging from the work equipment con-
trol lever, do not start the engine or touch the levers .
CHECKS BEFORE STARTING ENGINE
Carry out the following checks before starting the engine at the beginning of the day's work.
● Completely remove all flammable materials accumulated around the engine and battery, and remove any dirt
from the windows, mirrors, handrails and steps.
● Remove all dirt from the surface of the lens of the front lamps and working lamps, and check that they light up
correctly.
● Check the coolant level, fuel level, and oil level in engine oil pan, check for clogging of the air cleaner, and
check for damage to the electric wiring.
● Adjust the operator's seat to a position where it is easy to carry out operations, and check that there is no dam-
age or wear to the seat belt or mounting clamps.
● Check that the gauges work properly, check the angle of the lights and working lamps, and check that the con-
trol levers are all at the neutral position.
● When starting the engine, check that the parking lever and safety lock lever are at the LOCK position.
● Adjust the mirrors so that you can get a good rear-view from the operator's seat.
● For the details of adjustment, see "ADJUST MIRROR".
● Check that there are no persons or obstacles above, below, or in the area around the machine.
To Next Page
Loading...
Need help?
General
