10. HANDLING RADIO CONTROL OPERATION
3-18
10.2 FLOW CHART FOR STOPPING OPERATION USING RADIO
CONTROL
Transmitter has been tilted
continuously for more than
2 seconds.
After approx. 3 seconds after
turning power key switch on
transmitter OFF.
Press emergency stop button
on transmitter.
Start engine.
Set parking lever to LOCK position (lowered)
Return key on machine to OFF position
Set selector switch to ON-BOARD
If the engine does not stop (this may happen if an error has occurred and the red rotating lamp is lighted
up), stop the machine at a safe place, use the radio control operation to apply the parking brake, and
check that the condition is safe.
Then get on the machine, set the parking lever to the LOCK position, turn the key to the OFF position,
and stop the engine.
To Next Page
Loading...
Need help?
General
