Komatsu D375A-5 User Manual

FOREWORD 2. SAFETY INFORMATION
1-3
2. SAFETY INFORMATION
To enable you to use this machine safely, safety precautions and labels are given in this manual and affixed to the
machine to give explanations of situations involving potential hazards and of the methods of avoiding such situa-
tions.
Signal words
The following signal words are used to inform you that there is a potential hazardous situation that may lead to per-
sonal injury or damage.
In this manual and on machine labels, the following signal words are used to express the potential level of hazard.
Indicates an imminently hazardous situation which, if not avoided, will result in death or seri-
ous injury. This signal word is to be limited to most extreme situations.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or mod-
erate injury. It may also be used to alert against unsafe practices.
Example of safety message using signal word
WARNING
To avoid hitting unlocked operation levers, lower equipment to ground and move SAFETY LOCK LEVER
(located near seat) to LOCK position before starting up from operator's seat.
Sudden and unwanted machine movement can cause serious injury or death.
Other signal words
In addition to the above, the following signal words are used to indicate precautions that should be followed to pro-
tect the machine or to give information that is useful to know.
This word is used for precautions that must be taken to avoid actions which could shorten
the life of the machine.
This gives information that is useful to know.
DANGER
WARNING
CAUTION
NOTICE
REMARK

Komatsu D375A-5 Specifications

General

Brand	Komatsu
Model	D375A-5
Category	Tractor
Language	English

Summary

Foreword and Introduction

Manual Foreword

Introduces the manual's purpose and guidelines for safe operation and maintenance.

Safety Information

Safety Labels Overview

Explains safety labels using words and pictograms to convey hazards and avoidance methods.

Introduction to the Machine

Product Information

Transmitter Nameplate Location

Specifies the location of the nameplate on the transmitter unit.

Receiver Nameplate Location

Specifies the location of the nameplate on the receiver unit.

Controller Nameplate Location

Specifies the location of the nameplate on the controller unit.

Machine and Distributor Information

Provides fields to record machine serial number, engine serial number, distributor, and service contact details.

General Safety Precautions

Operational Safety Precautions

OPERATION

Machine General View

Illustrates the main components of the machine and radio control equipment.

Radio Control Component Explanations

Explains the function, movement, and operation of components needed for radio control.

Radio Control Handling Procedures

Provides instructions and procedures for safely handling and operating the radio control system.

Radio Control Operation Precautions

Details essential precautions to ensure safe and effective operation using the radio control system.

Machine Operation via Radio Control

Explains the step-by-step procedures for operating the machine using the radio control system.

Radio Control Equipment Handling Precautions

Outlines important precautions for handling and maintaining the radio control equipment.

Pre-Operation Machine Checks

Lists essential checks to perform around the machine before starting the engine for safe operation.

Troubleshooting Radio Control Failures

Provides guidance on identifying and addressing potential problems or failures with the radio control system.