OPERATION TRANSPORTATION
3-91
SECURING MACHINE
WARNING
When the edge of the blade protrudes beyond the trailer, angle the blade.
NOTICE
Be sure to retract the car radio antenna (if the machine equipped with cab).
Load the machine on to a trailer as follows.
1. Lower the work equipment slowly.
2. Lock brade control levers securely with the safety lock
lever.
3. Set the brake lock lever to the LOCK position.
4. Turn the starting switch to the OFF position to stop the engine, and pull out the starting switch key.
5. Fix the machine as explained below so that it will not move during transportation.
In particular, fix the machine securely to prevent it from slipping sideways.
To Next Page
Loading...
Need help?
General
