Komatsu D61PX-12 User Manual

ATTACHMENTS, OPTIONS HANDLING TOWING WINCH
6-15
FLOAT (BRAKE RELEASED)
WARNING
When removing or installing the wire rope, always wear thick leather working gloves.
When winding out the wire rope under external force, do as follows.
1. 1. When the winch control lever is moved fully forward
from the N position, it catches in the notch and is held in
the FLOAT position. When this happens, the braking
force on the drum is completely removed. To return the
lever, pull it by hand.
2. 2. This operation enables the wire rope to be wound out
under external force.
REMARK
Even when the lever is at the FLOAT (BRAKE RELEASED)
position, the wire rope cannot be pulled by human force.
ADJUSTING
ADJUSTING CLUTCH
If any abnormality is found, please contact your Komatsu distributor for inspection and repairs.
ADJUSTING BRAKE
If the wire rope can be wound out from the drum when the winch control lever is at the N position, the brake is not
working, so please contact your Komatsu distributor for inspection and repairs.
ADJUSTING SLOW WINDING-OUT SPEED
1. Turn up the boot of the winch control lever.

Komatsu D61PX-12 Specifications

General

Brand	Komatsu
Model	D61PX-12
Category	Construction Equipment
Language	English