FOREWORD INTRODUCTION
1-7
INTRODUCTION
This Komatsu machine is designed to be used mainly for the following works:
● Dozing
● Smoothing
● Cutting into hard or frozen ground or ditching.
● Felling trees, removing stumps
See the section "WORK POSSIBLE USING BULLDOZER (PAGE 3-77)" for further details.
FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE
In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's cab when
the operator's cab is facing the front and the sprocket is at the rear of the machine.
To Next Page
Need help?
General
