.
OPERATION
EXPLANATION OF COMPONENTS
FUSES
The fuses protect the electrical equipment and wiring from burning
out.
If the fuse becomes corroded, or white powder can be seen, or the
fuse is loose in the fuse holder, replace the fuse.
NOTICE
When replacing any fuse, always turn the power off (turn the starting
switch to OFF).
When replacing the fuse, always use a fuse of the same capacity and
type.
FUSE CAPACITY AND CIRCUIT NAME
Fuse box I
No. Capacity Name of circuit
(1) 10A Main lamp, Side lamp
(2) 10A Turn signal lamp
(3) 20A Head lamp (low beam)
(4) 20A Head lamp (high beam)
(5) 20A Head lamp (low beam)
(6) 20A Head lamp (high beam)
(7) 10A Brake lamp
(8) 20A Backup lamp
(9) 10A Clearance lamp
(10) 20A -
3 - 46
To Next Page
Loading...
Need help?
General
