• Do not use the work equipment or swing to pull the load in
any direction.
There is a danger that the hook may be break and the load
come off, causing the work equipment to move suddenly and
cause personal injury.
• When swinging or operating the work equipment, check
carefully that the surrounding area is clear from objects,
structures or any persons working around the machine.
• During the lifting operation, reduce the engine speed and
carry out the operation in L mode.
• Never travel the machine while lifting the load.
• If the load approaches the lifting limit of the machine, a
warning is shown on the monitor panel and an audible
alarm sounds. In this case, lower the load to the ground.
PRECAUTIONS FOR OPERATION SAFETY
2-42
To Next Page
Loading...
