INTRODUCTION
MAIN USE OF MACHINE
This Komatsu machine is designed to be used mainly for the following work:
• Digging work
• Ditching work
• Loading work
• Levelling work
For details of work procedure, see MACHINE OPERATIONS AND CONTROLS “RECOMMENDED APPLICA-
TIONS (3-205)”.
DEMOLITION WORK
WARNING
• A demolition machine is a machine based on earth
moving machinery (see EN ISO 6165) and including
equipment and attachment (working tool - e.g. pro-
cessor or breaker) specifically designed to demolish,
cut, loosen, separate, pick up, transport and distribute
component parts of buildings or civil engineering
structures.
• This machine is not prepared for use in Demolition.
• Using this machine in demolition work gives an in-
creased risk of serious injury or death.
• All Komatsu machines that are specifically designed,
and can be used for demolition work, will display the
Komatsu demolition decal.
• If the machine does not display this decal and it is
necessary to carry out demolition work, contact your
distributor for information on demolition machinery compliant with the applicable standards.
DIRECTIONS OF MACHINE
(A) Front
(B) Rear
(C) Left
(D) Right
INTRODUCTION FOREWORD
1-8
To Next Page
Loading...
Need help?
General
