bizhub 164 9-9
9.3 [UTILITY]
9
9.3.5 [COPY SETTING]
Configure the initial values for the copy settings.
% Press the Menu/Select key ö [UTILITY] ö [COPY SETTING].
Settings
[QUALITY PRIORITY] [TEXT/PHOTO] Select this option when the original consists of
text and photos. The edge of the text is repro-
duced sharply, while photos are reproduced as a
smooth image.
[TEXT] Select this option when the original consists of
text only. The edge of the text is reproduced
sharply.
[PHOTO] Select this option when the original consists of
photos only. Photos are reproduced as a smooth
image.
[DENSITY PRIORITY] [AUTO] The density level is automatically adjusted.
[MANUAL] The density level is manually adjusted.
[DENSITY LEVEL] [AUTO] Select one of three density levels for the [AUTO]
density setting.
[MANUAL] Select one of nine density levels for the [MANU-
AL] density setting.
[ERASE SETTING] Specify the erase width between 5 mm and 20 mm (in 1 mm increments)
when making copies with [LEFT ERASE], [UPPER ERASE] or [FRAME
ERASE] selected for the [ERASE] setting.
[LEFT] Erases the left side of the original.
[UPPER] Erases the upper side of the original.
[FRAME] Erases the frame around the original.
[SORT PRIORITY] Specify whether to sort copies as they are fed into the output tray.
[4IN1 COPY ORDER] Specify the combine order of the original for 4in1.
[PATTERN1]
[PATTERN2]
To Next Page
Loading...
Need help?
General
