EasyManuals Logo
Home>Konica Minolta>Digital Camera>DiMAGE Z1

Konica Minolta DiMAGE Z1 User Manual

Konica Minolta DiMAGE Z1
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43
ATTACHING A MINOLTA ACCESSORY FLASH
To extend the versatility of the camera, an accessory flash unit (sold separately) can be
used. Always remove the accessory flash when the camera is not in use, and replace the
accessory-shoe cap to protect the contacts.
Slide the accessory-shoe cap off as shown. Mount
the flash unit on the accessory shoe by sliding it
forward until it stops.
The following Minolta flash units are compatible with this camera:
Maxxum/Program Flash 2500(D)
Maxxum/Program Flash 3600HS(D)
Maxxum/Program Flash 5600HS(D)
System Accessories
When using an accessory flash, the camera uses pre-flash TTL metering to determine exposure.
The flash modes available when using an optional flash unit varies with the
exposure mode. Autoflash can only be used with auto, program (P), and
Digital Subject Programs. Fill-flash and slow sync. can be used with all
exposure modes except movie. Red-eye reduction cannot be used. Because
of the large distance between the flash tube and optical axis, red eye is rarely
caused by accessory flash units.
Off-camera flash cables and accessories are not compatible with this camera. The Close-up
Diffuser CD-1000 can be used, but AF speed is reduced.
Flash Notes

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Konica Minolta DiMAGE Z1 and is the answer not in the manual?

Konica Minolta DiMAGE Z1 Specifications

General IconGeneral
BrandKonica Minolta
ModelDiMAGE Z1
CategoryDigital Camera
LanguageEnglish

Related product manuals