63
COLOR MODE
The color mode controls whether a still image is color or
black and white. This must be set before the image is
recorded. The color mode is set in section 3 of the P, A,
S, and M menus (p. 44). The live image reflects the
selected color mode. The color mode has no effect on
image file size.
Natural Color reproduces the colors in the scene
faithfully. This mode uses no monitor indicator when
active. Vivid Color increases the saturation of the colors
in the scene. Black & White produces neutral
monochrome images. The sepia mode creates warm-
tone monochrome images.
Black & White
Vivid Color
Sepia
CONTRAST
Contrast: normal
Contrast: low Contrast: high
This function increases or decreases the contrast of the scene in three levels: high (+),
normal, and low (–). This can be set in section 3 of the P, A, S, and M menus (p. 44). Any
changes made are applied to the live image. If any level except normal is selected, an
indicator appears on the monitor as a warning.
To Next Page
Loading...
Need help?
General
