88
S
ETUP MENU
FOLDER NAME
All recorded images are stored in folders on the memory card. Two folder-
name formats are available in section 2 of the setup menu, standard and
date.
Standard folders have an eight character name. The initial folder is
named 100MLT20. The first three digits are the folder’s serial number,
which will increase by one each time a new folder is created. The next
three letters refer to Minolta, and the last two numbers indicate the
camera used; 29 indicates a DiMAGE Z1.
A date folder name also starts with the three digit serial number and is
followed by one register for the year, two register for the month, and two
registers for the day: 101YMMDD. The folder 10131219 was created in
2003 on December 19
th
.
With the date folder format selected, when an image is recorded, a new folder with the
day’s date is created. All images recorded that day are placed in that folder. Images
recorded on a different day are placed in a new folder with the corresponding date. If the
file number memory function is off (p. 87), when a new folder is created, the serial
number in the image-file name is reset to 0001. If file number memory function is on, the
serial number in the image-file is one greater than the last image saved. For more
information on folder organization and file names, see page 98.
100MLT29
(Standard)
10131219
(Date)
AUDIO SIGNALS
Every time a button is pressed, an audio signal gives a
positive confirmation of the operation. The audio signals
can be turn off in section 2 of the setup menu (p. 84). The
tone of the signal can also be changed; signal 1 is electrical
and signal 2 is mechanical.
File # memory
Folder name
Volume
Off
Std. form
1
1
2
Shutter FX
Audio signals
To Next Page
Loading...
Need help?
General
