91
p. 89
p. 92
Volume 2
Noise reduction On
Date imprinting Off
p. 91
DATE AND TIME SETUP
It is important to accurately set the clock. When a still image or a movie clip is recorded,
the date and time of the recording are saved with the image and are displayed during
playback or can be read with the supplied DiMAGE Viewer software. The date format that
is displayed or imprinted can be changed: YYYY/MM/DD (year, month, day),
MM/DD/YYYY (month, day, year), DD/MM/YYYY (day, month, year). See page 18 for
instructions on how to set the clock and calendar.
VIDEO OUTPUT
Camera images can be displayed on a television (p. 82). The
video output can be changed between NTSC and PAL in
section 4 of the setup menu. North America uses the NTSC
standard and Europe uses the PAL standard. Check which
standard is used in your region to play back images on your
television set.
NOISE REDUCTION
This function reduces the affect of dark noise caused by long
exposures. Noise reduction is only applied to exposures of
one second or longer. Dark-frame subtraction is applied to
each image after it is captured. The processing time varies
from image to image; a message will be displayed during this
period. Noise reduction can be turned off in section 3 of the
setup menu.
Reset default
Noise reductn
–
On
–
OffDate imprint
Date/Time set
Video output NTSC
p. 89Shutter FX 1
To Next Page
Loading...
Need help?
General
