Kramer VM-214DT User Manual

Kramer Electronics Ltd.
VM-214DT – Operating the VM-214DT Remotely Using the Web Pages
17
The EDID Management Page
The EDID page lets you copy EDID data to an input from any of the following:
• Output
• Input
• EDID data file
Figure 17: The EDID Management Page
Note: The display is not updated automatically when the status of an EDID changes on the
device caused by outputs being exchanged. Click Refresh to update the display, (see item 11
in the following table).
#
Item
Description
1
File Selector
Click to browse saved EDID files on the computer
2
Prevent Modification
Checkbox
Click to prevent modification of data
3
Default EDID Button
Click to read the default EDID
4
Output Buttons 1 and 2
2 buttons to select the output (highlighted when selected)
5
Connection Indicator
Lights green when connected, grey when off
6
EDID Source
Information
Device model, resolution, if audio connected
7
Web Page Selector
Click to show the desired Web page
8
Read From Section
From this section select the required EDID source to read from
9
Input Buttons (1-2)
Click to display the 2 input buttons for input selection, and port and signal
identification
10
Output Connection
Status
Shows whether output is connected or not
11
Copy To Section
From this section select the required EDID destination to which to copy
12
Un/Select All
Checkbox
Check to select or unselect copying EDID to all inputs

Kramer VM-214DT Specifications

General

Brand	Kramer
Model	VM-214DT
Category	Switch
Language	English