To Next PageTo Next PageTo Previous PageTo Previous Page
Why does the warning message persist after filling the water tank of my Krups Coffee Maker?
If the warning message remains on the screen of your Krups Coffee Maker after you've filled the water tank, check that the tank is correctly positioned in the appliance. Make sure the float at the bottom of the tank moves freely; check and unlock the float if needed.
How to unblock steam output on Krups EVIDENCE PLUS EA894T Coffee Maker?
If the steam output of your Krups coffee machine seems partially or completely blocked, remove the end piece from its support using the dismantling key. Clean all the parts, making sure the hole in the tip isn't blocked by milk or limescale residue. Use the cleaning needle if needed. Replace the nozzle and start the milk rinsing cycle of the One Touch Cappuccino block to eliminate any deposits.
Why is there no steam coming out of my Krups EVIDENCE PLUS EA894T Coffee Maker?
If no steam comes out of your Krups Coffee Maker, first check if the steam output is blocked. If the issue persists, empty the water tank and temporarily remove the Claris Aqua filter system cartridge. Fill the tank with mineral water high in calcium (more than 100mg/L) and run 5 to 10 successive steam cycles into a container until you get a continuous jet of steam. Then, put the cartridge back in the tank.
How to fix slow coffee flow on Krups Coffee Maker?
If the coffee is flowing too slowly from your Krups Coffee Maker, turn the “fineness of grinding” button to the right to get a coarser grind. Perform several rinsing cycles. Start the machine's cleaning program and change the Claris Aqua Filter System cartridge.
Why is my Krups EVIDENCE PLUS EA894T Coffee Maker not making hot coffee?
If your espresso or coffee from the Krups Coffee Maker isn't hot enough, run a coffee rinsing circuit before making your coffee. You can also increase the coffee temperature in the Settings menu. Try heating the cup with hot water during rinsing before you start preparing the drink.
Why is my Krups EVIDENCE PLUS EA894T not requesting descaling?
The descaling cycle for your Krups Coffee Maker is only requested after you have used the steam circuit a large number of times.
Why is the grinder on my Krups EVIDENCE PLUS EA894T making abnormal noise?
If the grinder of your Krups Coffee Maker is making an abnormal noise, there are likely foreign bodies present in the grinder.
What to do if warning message persists after emptying coffee grounds tray on Krups EVIDENCE PLUS EA894T?
If the warning message remains after you've emptied the coffee grounds tray on your Krups Coffee Maker, reinstall the coffee grounds tray and follow the directions on the screen.
Why does my Krups EVIDENCE PLUS EA894T say to empty the drip tray when it's not full?
If your Krups Coffee Maker asks for the drip tray to be emptied even when it is not full, the machine is programmed to request emptying after a set number of coffees, regardless of any intermediate emptying you do.
Why are there coffee grounds in the drip tray of my Krups EVIDENCE PLUS EA894T?
If you find some grounds in the drip tray of your Krups Coffee Maker, a small amount of ground coffee can get into the drip tray. The machine is designed to evacuate any excess ground coffee to keep the percolation zone clean.
General| Control type | Touch |
|---|---|
| Display type | OLED |
| Product color | Titanium |
| Built-in display | Yes |
| Product type | Espresso machine |
| Capacity in cups | 2 cups |
| Milk adding type | Automatic |
| Number of spouts | 2 |
| Coffee input type | - |
| Coffee maker type | Fully-auto |
| Country of origin | France |
| Appliance placement | Countertop |
| Water tank capacity | 2.3 L |
| Coffee beans capacity | 260 g |
| Maximum operating pressure | 15 bar |
| Reservoir for brewed coffee | Cup |
| Ground coffee container capacity | 9 cups |
| Number of coffee strength settings | 3 |
| Pallet width | 800 mm |
| Pallet height | 2174 mm |
| Pallet length | 1200 mm |
| Pallet weight | 391752 g |
| Quantity per pallet | 40 pc(s) |
| Quantity per pallet layer | 8 pc(s) |
| Quantity per intermodal container (20ft) | 448 pc(s) |
| Quantity per intermodal container (40ft) | 924 pc(s) |
| Quantity per intermodal container (40ft, HC) | 1155 pc(s) |
| Package depth | 381 mm |
| Package width | 287 mm |
| Package height | 484 mm |
| Package weight | 10750 g |
| Number of programs | 14 |
Weight and Dimensions| Depth | 372 mm |
|---|---|
| Width | 240 mm |
| Height | 363 mm |
| Weight | 8400 g |
Explains warning symbols used in the instructions for safety and operation.
Lists all the parts and accessories supplied with the KRUPS EA894 machine.
Details the physical layout of the appliance and functions of the control panel buttons.
Guide to configuring language, units, date, time, auto-on/off, and filter installation.
Step-by-step guide on how to install the Claris Aqua Filter System cartridge.
Procedure to prime the appliance and adjust settings based on water hardness.
Guidance on adjusting grinder fineness, coffee output volume, and using dual cup/DARK functions.
How to add an extra espresso shot to selected drinks for enhanced flavor.
Steps for preparing coffee drinks via direct access, including possible settings.
Instructions for preparing three milk-based drinks: Cappuccino, Latte Macchiato, and Caffe Latte.
Procedure for rinsing the milk system after preparing milk-based drinks.
Instructions for preparing various teas, including volume adjustment and extra shot option.
Guides for preparing Ristretto, Doppio, Americano, Flat White, and Espresso Macchiato.
Covers date, time, language, units, temperatures, auto-on/off, and auto-rinsing settings.
Overview of programs for cleaning the milk system and coffee circuit.
Detailed instructions for installing, changing, and removing the filter cartridge.
Procedure for performing the automatic descaling program to remove limescale.
Maintaining the drip tray, grounds collector, and performing circuit rinsing.
Procedure for cleaning the coffee circuit using a KRUPS cleaning tablet.
Step-by-step guide to clean the milk frothing system components.
Procedure for descaling the steam circuit using a KRUPS descaler.
Solutions for common operational errors, usage issues, and appliance malfunctions.
Addressing steam blockages, no steam, steam leaks, and maintenance warnings.
Resolving issues related to milk suction, froth quality, milk/water flow, coffee strength, and temperature.
