Krups EVIDENCE PLUS EA894T User Manual

When the number of drinks is not enough for descaling to be necessary, the function is not active.
You can also start the descaling program when you want:
- Fill the water tank up to the CALC mark.
- Pour the dose of descaler into the water tank.
- Press the Settings button .
- Select Maintenance.
- Then Descaling.
!
Important: if you unplug your machine during cleaning or in the event of electrical failure, the descaling program
will resume the current step at the time of the incident. It will not be possible to postpone this operation.
Complete the full descaling cycle in order to remove all traces of the descaling product which is harmful
to health.
TROUBLESHOOTING
PROBLEM CORRECTIVE ACTIONS
OPERATION
The machine displays a fault, the
software is frozen.
OR
Your machine has a malfunction.
Turn off and unplug the machine, remove the lter cartridge,
wait a minute and restart the machine.
Press and hold the on/off button for at least 3 seconds for
starting.
The appliance does not turn on after
pressing the On/Off button (for at least
3 seconds).
Check the fuses and the power socket of your electrical
installation.
Check that the two power plugs are correctly inserted into
the socket.
The appliance must be disconnected
and reconnected.
Unplug the appliance for 20 seconds, remove the Claris
Aqua Filter System cartridge if necessary, then put it back
into service.
A power failure has occurred during a
cycle.
The appliance resets automatically when it turns back on.
USE
The grinder makes an abnormal noise. Foreign bodies are surely present in the grinder.
There is water under the appliance.
Before removing the water tank, wait 15 seconds after the ow
of coffee so that the machine nishes its cycle correctly.
Verify that the drip tray is well positioned on the machine. It
must always be in place even when the machine is not in use.
Verify that the drip tray is not full.
When switching off, hot water ows
through the coffee outputs and the One
Touch Cappuccino block.
Depending on the type of preparation the machine can
perform automatic rinsing during its powering off.
The cycle lasts only a few seconds and stops automatically.
The adjustment button for the grinding
neness is difcult to turn.
Turn the adjustment button of the grinding neness only
when the grinder is operating.
The appliance has not issued any
coffee.
An incident has been detected during its making.
The appliance is reset automatically and is ready for a new
cycle.
You have used ground coffee instead of
coffee beans.
Use your vacuum cleaner to collect the ground coffee
contained in the bean container.
36

Krups EVIDENCE PLUS EA894T Specifications

General

Control type	Touch
Display type	OLED
Product color	Titanium
Built-in display	Yes
Product type	Espresso machine
Capacity in cups	2 cups
Milk adding type	Automatic
Number of spouts	2
Coffee input type	-
Coffee maker type	Fully-auto
Country of origin	France
Appliance placement	Countertop
Water tank capacity	2.3 L
Coffee beans capacity	260 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Ground coffee container capacity	9 cups
Number of coffee strength settings	3
Pallet width	800 mm
Pallet height	2174 mm
Pallet length	1200 mm
Pallet weight	391752 g
Quantity per pallet	40 pc(s)
Quantity per pallet layer	8 pc(s)
Quantity per intermodal container (20ft)	448 pc(s)
Quantity per intermodal container (40ft)	924 pc(s)
Quantity per intermodal container (40ft, HC)	1155 pc(s)
Package depth	381 mm
Package width	287 mm
Package height	484 mm
Package weight	10750 g
Number of programs	14

Weight and Dimensions

Depth	372 mm
Width	240 mm
Height	363 mm
Weight	8400 g