14 BRAKE SYSTEM 125
400618-10
– Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness
.
Info
Wear will reduce the thickness of the brake disc at the contact surface
of
the brake linings.
Brake discs - wear limit
Front 4 mm (0.16 in)
Rear 4.5 mm (0.177 in)
» If the brake disc thickness is less than the specified value.
– Change the brake disc.
– Check the front and rear brake discs for damage, cracking, and deformation.
» If the brake disc exhibits damage, cracking, or deformation:
– Change the brake disc.
14.3 Checking the brake fluid level of the front brake
Warning
Danger of accidents Failure of the brake system.
– If the brake fluid level falls below the MIN mark, this indicates a leakage in the brake system or worn-out brake linings. Check
the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)
Warning
Danger of accidents Reduced braking efficiency due to old brake fluid.
– Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)
To Next Page
Loading...
Need help?
General
