KTM 1050 Adventure User Manual

7 COMBINATION INSTRUMENT 57
7.9.15 "Pressure"
402431-13
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
– Press the UP or DOWN button until "Pressure" is highlighted in black on the matrix dis-
play. Pressing the SET button again sets the unit of measure.
Select "bar" or "psi" as the unit.
7.9.16 "Fuel Cons"
402431-14
Condition
• The vehicle is stationary.
– Press the UP or DOWN button until the "Settings" menu appears on the matrix display.
Pressing the SET button opens the menu.
– Press the UP or DOWN button until "Fuel Cons" is highlighted in black on the matrix dis-
play. Pressing the SET button again sets the unit of measure.
Select one of the available consumption displays.

KTM 1050 Adventure Specifications

General

Displacement	1050 cc
Transmission	6-speed
Fuel Tank Capacity	23 liters
Seat Height	850 mm
Bore x Stroke	103 mm x 63 mm
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
ABS	Bosch 9M+ two-channel ABS
Compression Ratio	12.5:1
Starter	Electric
Engine Type	2-cylinder, 4-stroke
Power	95 hp
Torque	107 Nm
Front Suspension	WP USD, 43 mm
Rear Suspension	WP monoshock
Front Brake	4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
Frame	Chromium-Molybdenum steel trellis
Front Wheel	19 inch
Rear Wheel	17 inch
Dry Weight	212 kg (467 lbs)