13 SERVICE WORK ON THE CHASSIS 97
13.7 Removing the seat
S00745-10
–
Insert the ignition key in the seat lock
and turn it clockwise by 45°.
– Raise the rear of the seat, pull the seat back, and lift it off.
– Remove the ignition key.
13.8 Mounting the seat
401677-10
–
Hook the catch
of the seat onto the fuel tank and lower the rear while pushing it
forward.
–
Insert the locking pin
into the lock housing and push down the rear of the seat until
the locking pin engages with an audible click.
– Finally, check that the seat is correctly mounted.
To Next Page
Loading...
Need help?
General
