16 ELECTRICAL SYSTEM 165
16.13 Adjusting the headlight range
Preparatory work
– Check the headlight setting. ( p. 164)
– Remove the bottom triple clamp cover. ( p. 107)
M00950-10
Main work
–
Turn adjusting screw
to adjust the headlight range.
Info
Turn clockwise to increase the headlight range; turn counterclockwise to reduce
the headlight range.
If you have a payload, you may have to correct the headlight range.
400726-11
–
Set the headlight to marking
.
Guideline
The light-dark boundary must lie exactly on the lower mark
when the motorcycle
is ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
Finishing work
– Install the bottom triple clamp cover. ( p. 108)
To Next Page
Loading...
Need help?
General
