16 ELECTRICAL SYSTEM 159
16.8 Refitting the headlight mask with the headlight
602645-11
Main work
–
Connect plug-in connector
of the headlight.
– Check that the lighting is functioning properly.
– Position the headlight mask.
S00368-11
–
Mount and tighten screws
.
Guideline
Remaining chassis screws M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the wind shield. ( p. 121)
– Install the mask spoiler. ( p. 114)
– Install the tank cover. ( p. 119)
– Install the front side cover. ( p. 110)
– Mount the seat. ( p. 97)
– Check the headlight setting. ( p. 164)
To Next Page
Loading...
Need help?
General
