KTM 1050 Adventure User Manual

17 COOLING SYSTEM 172
» If the coolant in the compensating tank is not at the required level, but the tank
is not empty:
– Correct the coolant level in the compensating tank. ( p. 172)
M00946-10
(1050 Adventure AU)
–
Check the coolant level in the compensating tank

.
The coolant level must be between MIN and MAX.
» If there is no coolant in the compensating tank:
– Check the cooling system for leaks.
Info
Do not start up the motorcycle!
– Add coolant/bleed the cooling system.
» If the coolant in the compensating tank is not at the required level, but the tank
is not empty:
– Correct the coolant level in the compensating tank. ( p. 172)
17.2 Correcting the coolant level in the compensating tank
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse immediately with lukewarm water.

KTM 1050 Adventure Specifications

General

Displacement	1050 cc
Transmission	6-speed
Fuel Tank Capacity	23 liters
Seat Height	850 mm
Bore x Stroke	103 mm x 63 mm
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
ABS	Bosch 9M+ two-channel ABS
Compression Ratio	12.5:1
Starter	Electric
Engine Type	2-cylinder, 4-stroke
Power	95 hp
Torque	107 Nm
Front Suspension	WP USD, 43 mm
Rear Suspension	WP monoshock
Front Brake	4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
Frame	Chromium-Molybdenum steel trellis
Front Wheel	19 inch
Rear Wheel	17 inch
Dry Weight	212 kg (467 lbs)