KTM 1050 Adventure User Manual

24 SUBSTANCES 208
Hydraulic fluid (15)
Standard/classification
– ISO VG (15)
Guideline
– Use only hydraulic oil that complies with the specified standard (see specifications on the container) and that possesses the corre-
sponding properties.
Recommended supplier
Motorex
®
– Hydraulic Fluid 75
Shock absorber fluid (SAE 2.5) (50180751S1)
Standard/classification
– SAE ( p. 211) (SAE 2.5)
Guideline
– Use only oils that comply with the specified standards (see specifications on the container) and that exhibit the corresponding proper-
ties.
Super unleaded (ROZ 95/RON 95/PON 91)
Standard/classification
– DIN EN 228 (ROZ 95/RON 95/PON 91)
Guideline
– Only use unleaded super fuel that matches or is equivalent to the specified fuel grade.
– Fuel with an ethanol content of up to 10 % (E10 fuel) is safe to use.
Info
Do not use fuel containing methanol (e. g. M15, M85, M100) or more than 10 % ethanol (e. g. E15, E25, E85, E100).

KTM 1050 Adventure Specifications

General

Displacement	1050 cc
Transmission	6-speed
Fuel Tank Capacity	23 liters
Seat Height	850 mm
Bore x Stroke	103 mm x 63 mm
Fuel System	Electronic Fuel Injection
Cooling System	Liquid cooled
ABS	Bosch 9M+ two-channel ABS
Compression Ratio	12.5:1
Starter	Electric
Engine Type	2-cylinder, 4-stroke
Power	95 hp
Torque	107 Nm
Front Suspension	WP USD, 43 mm
Rear Suspension	WP monoshock
Front Brake	4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
Frame	Chromium-Molybdenum steel trellis
Front Wheel	19 inch
Rear Wheel	17 inch
Dry Weight	212 kg (467 lbs)