KTM 1090 ADVENTURE 2017 User Manual

16 ELECTRICAL SYSTEM 174
– Check that the turn signal is functioning properly.
– Position the diffuser.
Info
Insert catch
A
into recess
B
.
– Insert the screw and first turn counterclockwise until it engages in the thread with a
small jerk. Tighten the screw lightly.
16.12 Checking the headlight setting
400726-10
– Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the height of the center of the low beam headlight.
–
Make another mark at a distance
B
under the first mark.
Guideline
Distance
B
5 cm (2 in)
–
Position the vehicle perpendicular to the wall at a distance
A
from the wall and switch
on the low beam.
Guideline
Distance
A
5 m (16 ft)
– The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
» If the boundary between light and dark does not meet specifications:
– Adjust the headlight range. ( p. 175)

KTM 1090 ADVENTURE 2017 Specifications

General

Brand	KTM
Model	1090 ADVENTURE 2017
Category	Motorcycle
Language	English