16 ELECTRICAL SYSTEM 171
F00678-10
–
Plug connector
2
into the new headlight bulb.
Low beam (H11/socket PGJ19-2) ( p. 210)
–
Position headlight bulb
1
into the bulb socket and turn it all the way clockwise.
The headlight bulb is locked into the bulb socket.
Finishing work
– Install the headlight mask with the headlight. ( p. 169)
– Install the wind shield. ( p. 127)
– Install the mask spoiler. ( p. 118)
– Install the tank cover. ( p. 125)
– Install the front side cover. ( p. 114)
– Mount the seat. ( p. 101)
– Check the headlight setting. ( p. 174)
16.10 Changing the high beam bulb
Note
Damage to reflector Grease on the reflector reduces the brightness.
Grease on the lamp will evaporate due to the heat and be deposited on the reflector.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
To Next Page
Loading...
Need help?
General
