To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...What to do if KTM Motorcycle engine turns but does not start?
If your KTM Motorcycle engine turns but doesn't start, there could be a fault in the fuel injection system, in that case, read out the fault memory using the KTM diagnostics tool. Alternatively, the fuel quality might be insufficient, so add suitable fuel.
What to do if KTM 1090 ADVENTURE 2017 engine does not crank?
If your KTM Motorcycle engine doesn't crank when you press the electric starter, there are several potential causes. First, ensure the emergency OFF switch is in the ON position. If that's not the issue, you may not be following the correct start procedure, so review the start procedure. Also, check if the battery is discharged and recharge it if necessary, while checking the quiescent current. Other potential issues could be a faulty safety start system, an ICU that is not enabled (activate the ICU), a CAN bus communication error, or a fault in the EFI or MCU control unit. For safety start system, CAN bus communication error, fault in EFI control unit, fault in MCU control unit you should read out the fault memory using the KTM diagnostics tool.
Why does my KTM 1090 ADVENTURE 2017 Motorcycle have high oil consumption?
General| Engine Type | 2-cylinder, 4-stroke, V 75° |
|---|---|
| Displacement | 1050 cc |
| Torque | 109 Nm @ 6500 rpm |
| Transmission | 6-speed |
| Fuel Tank Capacity | 23 liters |
| Seat Height | 850 mm |
| Dry Weight | 205 kg |
| Front Suspension | WP USD Ø 48 mm |
| Fuel System | Electronic Fuel Injection |
| Bore x Stroke | 103 mm x 63 mm |
| Compression Ratio | 13.0:1 |
| Starter | Electric starter |
| Power | 92 kW (125 hp) @ 8500 rpm |
| Rear Suspension | WP monoshock |
| Front Brake | 2 x Brembo 320 mm discs, 4-piston radial calipers |
| Rear Brake | Brembo 267 mm disc, 2-piston caliper |
| ABS | Bosch 9M+ two-channel ABS |
| Cooling | Liquid cooled |
| Frame | Chromium-Molybdenum steel trellis frame, powder coated |
| Front Tire | 120/70 R19 |
| Rear Tire | 150/70 R17 |
Provides essential safety guidelines for operating the vehicle.
Explains danger, warning, caution, and note symbols for hazard identification.
Outlines safe riding practices and the importance of protective gear.
Locates the chassis number and type label on the vehicle.
Explains how to find the key number and engine number.
Describes clutch lever, hand brake lever, and throttle grip functions.
Details the combination switch and its functions.
Covers the emergency OFF switch and electric starter button.
Explains ignition lock, steering lock, and immobilizer system.
Instructions for locking and unlocking the steering mechanism.
Explains the operation of the shift lever and foot brake lever.
Introduces the instrument panel and its activation process.
Explains the elements of the matrix and segment displays.
Details indicator lamps and warning messages shown on the display.
Guides through the matrix display menu system for accessing information.
Provides a visual menu map and language configuration.
Discusses handlebar mounting positions and adjustment options.
Details adjusting clutch and hand brake lever positions for comfort.
Guides through adjusting rider footrest positions for optimal comfort.
Covers adjusting the basic position of shift and foot brake levers.
Provides essential tips for initial use and engine running-in procedures.
Lists checks before riding and steps for starting the engine.
Covers starting off, shifting, braking, and stopping the motorcycle.
Alerts about ignition key position, adjustments, passenger safety, and riding style.
Discusses weight loads, luggage, falls, and basic engine care.
Provides guidelines for transporting and refueling the motorcycle safely.
Lists common faults, their causes, and recommended actions.
