KTM 1090 ADVENTURE 2017 User Manual

16 ELECTRICAL SYSTEM 177
– Switch off the ignition by turning the black ignition key to the position OFF .
– Remove the black ignition key.
– Insert the orange programming key in the ignition lock.
– Switch on the ignition by turning the orange programming key to the ON position .
The immobilizer indicator lamp flashes according to the number of func-
tional black ignition keys including the orange programming key. In this case,
it flashes twice.
– Switch off the ignition by turning the orange programming key to the OFF position .
– Pull out the orange programming key.
The lost black ignition key is deactivated.
The existing black ignition key is reactivated.
401114-11
Loss of all black ignition keys (no black ignition keys are available):
This procedure is important to prevent misuse of the lost black ignition key.
– Press the emergency OFF switch to the position ON .

KTM 1090 ADVENTURE 2017 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1050 cc
Torque	109 Nm @ 6500 rpm
Transmission	6-speed
Fuel Tank Capacity	23 liters
Seat Height	850 mm
Dry Weight	205 kg
Front Suspension	WP USD Ø 48 mm
Fuel System	Electronic Fuel Injection
Bore x Stroke	103 mm x 63 mm
Compression Ratio	13.0:1
Starter	Electric starter
Power	92 kW (125 hp) @ 8500 rpm
Rear Suspension	WP monoshock
Front Brake	2 x Brembo 320 mm discs, 4-piston radial calipers
Rear Brake	Brembo 267 mm disc, 2-piston caliper
ABS	Bosch 9M+ two-channel ABS
Cooling	Liquid cooled
Frame	Chromium-Molybdenum steel trellis frame, powder coated
Front Tire	120/70 R19
Rear Tire	150/70 R17