7 COMBINATION INSTRUMENT
26
7.8 Coolant temperature indicator
A00983-11
The coolant temperature display is shown in segment
1
of the
display.
The coolant temperature indicator consists of bars. The more bars
that light up, the hotter the coolant.
Note
Engine failure Overheating damages the engine.
– If the coolant temperature warning is displayed, stop imme-
diately and take care not to endanger yourself or other traffic
participants in the process.
– Allow the engine and cooling system to cool down.
– Check and, if necessary, correct the coolant level on the cool-
ing system while it is in a cooled state.
Info
When all the bars light up, the warning High Coolant Tem-
perature appears on the display.
If the cooling system overheats, the maximum engine
speed is limited.
Possible states
• The engine is cold – Up to three bars light up.
• Engine warm – Four to ten bars light up.
• Engine hot – Eleven to thirteen bars light up.
• Engine very hot – All thirteen bars light up.
7.9 Function buttons
A00973-01
Press the MODE button
1
to change display modes.
Possible display modes are ODO Menü (General trip data),
Time Trip 1 (Trip data 1), Time Trip 2 (Trip data 2), ABS Mode Menu
(Selected ABS function), Info Menu (Warnings).
Press the SET button
2
to change menus.
To Next Page
Loading...
Need help?
General
