15 ELECTRICAL SYSTEM
80
15.8 Adjusting the headlight range
S04238-10
Main work
–
Turn adjusting screw
1
to adjust the headlight range.
Info
Turn clockwise to increase the headlight range; turn
counterclockwise to reduce the headlight range.
If you have a payload, you may have to correct the
headlight range.
Screw
1
also secures the headlight. Ensure the screw
is always screwed in far enough.
Finishing work
– Check the headlight setting. ( p. 79)
15.9 Diagnostics connector
S04236-10
Diagnostics connector
1
is located under the passenger seat.
15.10 Front ACC1 and ACC2
S04237-10
Installation location
–
Power supplies ACC1
1
and ACC2
2
front are located
behind the left side beneath the fuel tank.
To Next Page
Loading...
Need help?
General
