KTM 2015 200 Duke User Manual

6 CONTROLS 47
6.11.22 Adjusting the shift speed RPM 1
Condition
The ignition is on.
The motorcycle is stationary.
401307-01
– Press the MODE button briefly and repeatedly until TRIP 2 appears on the display.
– Press the MODE button for 5 - 10 seconds.
The display RPM 1 appears.
Info
The engine speed can be set at intervals of 50.
RPM 1 is the engine speed above which the shift warning light starts to flash.
– Set the speed with the MODE and SET buttons.
Info
The MODE button increases the value.
The SET button decreases the value.
– Do not activate the two buttons for approx. 15 seconds.
The display RPM 1 goes out and the set speed is stored.
6.11.23 Adjusting the shift speed RPM 2
Condition
The ignition is on.
The motorcycle is stationary.

KTM 2015 200 Duke Specifications

General

Brand	KTM
Model	2015 200 Duke
Category	Motorcycle
Language	English