11 SERVICE WORK ON THE CHASSIS 78
11.6 Mounting the passenger seat
B00724-10
–
Attach hooks
on the passenger seat to brackets
on the subframe, and lower it at
the rear while pushing forward.
– Press down the passenger seat until it clicks into place.
Warning
Danger of accidents The passenger seat can come loose from the anchoring if it
is not mounted correctly.
– After mounting the passenger seat, check that it is locked correctly by
pulling up.
– Finally, check that the passenger seat is correctly mounted.
11.7 Removing the seat
Preparatory work
– Remove the passenger seat. ( p. 77)
B00725-10
Main work
–
Remove screws
.
– Raise the rear of the seat, pull it towards the rear, and remove it upwards.
To Next Page
Loading...
Need help?
General
