KTM 350 EXC-F 2022 User Manual

15 ELECTRICAL SYSTEM
114
15.7 Installing the headlight mask with the headlight
S01328-11
Main work
–
Join plug-in connectors
1
.
V01782-11
– Position the headlight mask and secure it with rubber
straps
2
.
The holding lugs engage in the fender.
– Position the brake line and wiring harness in the brake line
guide.
Finishing work
– Check the headlight setting. ( p. 115)
15.8 Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
Preparatory work
– Remove the headlight mask with the headlight. ( p. 113)
E00358-11
Main work
–
Turn protection cap
1
together with the underlying bulb
socket counterclockwise all the way and remove it.
–
Pull bulb socket
2
of the position light out of the reflector.

KTM 350 EXC-F 2022 Specifications

General

Displacement	349.7 cm³
Bore x Stroke	88 mm x 57.5 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Seat Height	960 mm
Ground Clearance	370 mm
ABS	No
Engine Type	Single Cylinder, 4-Stroke Engine
Fuel System	Keihin EFI, 42 mm Throttle Body
Rear Suspension	WP XPLOR shock absorber
Front Brake	260 mm disc brake
Rear Brake	220 mm disc brake
Frame	Central double-cradle type 25CrMo4 steel