11 SERVICE WORK ON THE CHASSIS 47
– Clean the intake flange and check it for damage and tightness.
Finishing work
–
Install the air filter. x ( p. 46)
– Install the air filter box lid. ( p. 45)
11.29 Securing the air filter box lid x
Preparatory work
– Remove the air filter box lid. ( p. 45)
C00229-10
Main work
– Drill a hole at markings A and B.
Guideline
Diameter 6 mm (0.24 in)
Finishing work
– Install the air filter box lid. ( p. 45)
11.30 Sealing the air filter box x
401527-10
– Seal the air filter box in marked area A.
11.31 Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
– Allow the exhaust system to cool down. Do not touch hot components.
S00128-10
– Disconnect spring 1.
Spring hooks (50305017000)
– Remove screws 2 and take off the main silencer.
To Next Page
Loading...
Need help?
General
